For recent publications please visit Prof. Surya R. Kalidindi’s Google Scholar page: Google Scholar

 

Publications 

 

Kalidindi, S., Bronkhorst, C., & Anand, L. (1992). Crystallographic texture evolution in bulk deformation processing of FCC metals. Journal of the Mechanics and Physics of Solids, 40(3), 537–569.

El-Raghy, T., Zavaliangos, A., Barsoum, M., & Kalidindi, S. (1997). Damage mechanisms around hardness indentations in Ti3SiC2. Journal of the American Ceramic Society, 80(2), 513–516.

Bronkhorst, C., Kalidindi, S., & Anand, L. (1992). Polycrystalline plasticity and the evolution of crystallographic texture in FCC metals. Philosophical Transactions of the Royal Society of London. Series A: Physical and Engineering Sciences, 341(1662), 443–477.

Barsoum, M., Zhen, T., Kalidindi, S., Radovic, M., & Murugaiah, A. (2003). Fully reversible, dislocation-based compressive deformation of Ti 3 SiC 2 to 1 GPa. Nature Materials, 2(2), 107–111.

Peeters, B., Seefeldt, M., Teodosiu, C., Kalidindi, S., Van Houtte, P., & Aernoudt, E. (2001). Work-hardening/softening behaviour of bcc polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress–strain behaviour of an IF steel during two-stage strain paths. Acta Materialia, 49(9), 1607–1619.

Kalidindi, S. (1998). Incorporation of deformation twinning in crystal plasticity models. Journal of the Mechanics and Physics of Solids, 46(2), 267–290.

El-Raghy, T., Barsoum, M., Zavaliangos, A., & Kalidindi, S. (1999). Processing and mechanical properties of Ti3SiC2: II, effect of grain size and deformation temperature. Journal of the American ceramic society, 82(10), 2855–2860.

El-Danaf, E., Kalidindi, S., & Doherty, R. (1999). Influence of grain size and stacking-fault energy on deformation twinning in fcc metals. Metallurgical and Materials Transactions A, 30(5), 1223–1233.

Asgari, S., El-Danaf, E., Kalidindi, S., & Doherty, R. (1997). Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy fcc alloys that form deformation twins. Metallurgical and Materials Transactions A, 28(9), 1781–1795.

Van Houtte, P., Delannay, L., & Kalidindi, S. (2002). Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction. International Journal of Plasticity, 18(3), 359–377.

Adams, B., Henrie, A., Henrie, B., Lyon, M., Kalidindi, S., & Garmestani, H. (2001). Microstructure-sensitive design of a compliant beam. Journal of the Mechanics and Physics of Solids, 49(8), 1639–1663.

Salem, A., Kalidindi, S., & Doherty, R. (2003). Strain hardening of titanium: role of deformation twinning. Acta Materialia, 51(14), 4225–4237.

Ferrasse, S., Segal, V., Kalidindi, S., & Alford, F. (2004). Texture evolution during equal channel angular extrusion: Part I. Effect of route, number of passes and initial texture. Materials Science and Engineering: A, 368(1-2), 28–40.

Anand, L., & Kalidindi, S. (1994). The process of shear band formation in plane strain compression of fcc metals: effects of crystallographic texture. Mechanics of Materials, 17(2-3), 223–243.

Radovic, M., Barsoum, M., Ganguly, A., Zhen, T., Finkel, P., Kalidindi, S., & Lara-Curzio, E. (2006). On the elastic properties and mechanical damping of Ti3SiC2, Ti3GeC2, Ti3Si0. 5Al0. 5C2 and Ti2AlC in the 300–1573 K temperature range. Acta materialia, 54(10), 2757–2767.

Barsoum, M., Murugaiah, A., Kalidindi, S., & Zhen, T. (2004). Kinking nonlinear elastic solids, nanoindentations, and geology. Physical review letters, 92(25), 255508.

Salem, A., Kalidindi, S., & Semiatin, S. (2005). Strain hardening due to deformation twinning in $\alpha$-titanium: Constitutive relations and crystal-plasticity modeling. Acta Materialia, 53(12), 3495–3502.

Bhattacharyya, A., El-Danaf, E., Kalidindi, S., & Doherty, R. (2001). Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations. International Journal of Plasticity, 17(6), 861–883.

Brodkin, D., Kalidindi, S., Barsoum, M., & Zavaliangos, A. (1996). Microstructural evolution during transient plastic phase processing of titanium carbide-titanium boride composites. Journal of the American Ceramic Society, 79(7), 1945–1952.

Delannay, L., Jacques, P., & Kalidindi, S. (2006). Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons. International Journal of Plasticity, 22(10), 1879–1898.

Peeters, B., Kalidindi, S., Van Houtte, P., & Aernoudt, E. (2000). A crystal plasticity based work-hardening/softening model for bcc metals under changing strain paths. Acta materialia, 48(9), 2123–2133.

Barsoum, M., Murugaiah, A., Kalidindi, S., Zhen, T., & Gogotsi, Y. (2004). Kink bands, nonlinear elasticity and nanoindentations in graphite. Carbon, 42(8-9), 1435–1445.

Kalidindi, S., Houskamp, J., Lyons, M., & Adams, B. (2004). Microstructure sensitive design of an orthotropic plate subjected to tensile load. International Journal of Plasticity, 20(8-9), 1561–1575.

Barsoum, M., Zhen, T., Zhou, A., Basu, S., & Kalidindi, S. (2005). Microscale modeling of kinking nonlinear elastic solids. Physical Review B, 71(13), 134101.

Zhou, A., Barsoum, M., Basu, S., Kalidindi, S., & El-Raghy, T. (2006). Incipient and regular kink bands in fully dense and 10 vol.\% porous Ti2AlC. Acta materialia, 54(6), 1631–1639.

Peeters, B., Kalidindi, S., Teodosiu, C., Van Houtte, P., & Aernoudt, E. (2002). A theoretical investigation of the influence of dislocation sheets on evolution of yield surfaces in single-phase BCC polycrystals. Journal of the Mechanics and Physics of Solids, 50(4), 783–807.

Salem, A., Kalidindi, S., & Doherty, R. (2002). Strain hardening regimes and microstructure evolution during large strain compression of high purity titanium. Scripta Materialia, 46(6), 419–423.

Kalidindi, S., & Abusafieh, A. (1996). Longitudinal and transverse moduli and strengths of low angle 3-D braided composites. Journal of composite materials, 30(8), 885–905.

El-Danaf, E., Kalidindi, S., & Doherty, R. (2001). Influence of deformation path on the strain hardening behavior and microstructure evolution in low SFE FCC metals. International Journal of Plasticity, 17(9), 1245–1265.

El-Danaf, E., Kalidindi, S., Doherty, R., & Necker, C. (2000). Deformation texture transition in brass: critical role of micro-scale shear bands. Acta Materialia, 48(10), 2665–2673.

Murugaiah, A., Barsoum, M., Kalidindi, S., & Zhen, T. (2004). Spherical nanoindentations and kink bands in Ti3SiC2. Journal of materials research, 19(4), 1139–1148.

Delannay, L., Kalidindi, S., & Van Houtte, P. (2002). Quantitative prediction of textures in aluminium cold rolled to moderate strains. Materials Science and Engineering: A, 336(1-2), 233–244.

Wu, X., Kalidindi, S., Necker, C., & Salem, A. (2007). Prediction of crystallographic texture evolution and anisotropic stress–strain curves during large plastic strains in high purity $\alpha$-titanium using a Taylor-type crystal plasticity model. Acta Materialia, 55(2), 423–432.

Narayanan, S., Kalidindi, S., & Schadler, L. (1997). Determination of unknown stress states in silicon wafers using microlaser Raman spectroscopy. Journal of applied physics, 82(5), 2595–2602.

Kalidindi, S., Bhattacharyya, A., & Doherty, R. (2004). Detailed analyses of grain–scale plastic deformation in columnar polycrystalline aluminium using orientation image mapping and crystal plasticity models. Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, 460(2047), 1935–1956.

Kalidindi, S., & Franco, E. (1997). Numerical evaluation of isostrain and weighted-average models for elastic moduli of three-dimensional composites. Composites Science and Technology, 57(3), 293–305.

Adams, B., Gao, X., & Kalidindi, S. (2005). Finite approximations to the second-order properties closure in single phase polycrystals. Acta Materialia, 53(13), 3563–3577.

Kalidindi, S., Abusafieh, A., & El-Danaf, E. (1997). Accurate characterization of machine compliance for simple compression testing. Experimental mechanics, 37(2), 210–215.

Kalidindi, S., & Schoenfeld, S. (2000). On the prediction of yield surfaces by the crystal plasticity models for fcc polycrystals. Materials Science and Engineering: A, 293(1-2), 120–129.

Kalidindi, S. (1998). Modeling the strain hardening response of low SFE FCC alloys. International Journal of Plasticity, 14(12), 1265–1277.

Proust, G., & Kalidindi, S. (2006). Procedures for construction of anisotropic elastic–plastic property closures for face-centered cubic polycrystals using first-order bounding relations. Journal of the Mechanics and Physics of Solids, 54(8), 1744–1762.

Barsoum, M., Radovic, M., Zhen, T., Finkel, P., & Kalidindi, S. (2005). Dynamic elastic hysteretic solids and dislocations. Physical review letters, 94(8), 085501.

Zhen, T., Barsoum, M., Kalidindi, S., Radovic, M., Sun, Z., & El-Raghy, T. (2005). Compressive creep of fine and coarse-grained T3SiC2 in air in the 1100–1300 C temperature range. Acta materialia, 53(19), 4963–4973.

Bachu, V., & Kalidindi, S. (1998). On the accuracy of the predictions of texture evolution by the finite element technique for fcc polycrystals. Materials Science and Engineering: A, 257(1), 108–117.

Kalidindi, S., Salem, A., & Doherty, R. (2003). Role of deformation twinning on strain hardening in cubic and hexagonal polycrystalline metals. Advanced Engineering Materials, 5(4), 229–232.

Kalidindi, S., & Anand, L. (1992). An approximate procedure for predicting the evolution of crystallographic texture in bulk deformation processing of fcc metals. International journal of mechanical sciences, 34(4), 309–329.

Kalidindi, S., & Anand, L. (1994). Macroscopic shape change and evolution of crystallographic texture in pre-textured FCC metals. Journal of the Mechanics and Physics of Solids, 42(3), 459–490.

Zhen, T., Barsoum, M., & Kalidindi, S. (2005). Effects of temperature, strain rate and grain size on the compressive properties of Ti3SiC2. Acta materialia, 53(15), 4163–4171.

Kalidindi, S., Binci, M., Fullwood, D., & Adams, B. (2006). Elastic properties closures using second-order homogenization theories: case studies in composites of two isotropic constituents. Acta materialia, 54(11), 3117–3126.

Salem, A., Kalidindi, S., Doherty, R., & Semiatin, S. (2006). Strain hardening due to deformation twinning in $\alpha$-titanium: mechanisms. Metallurgical and Materials Transactions A, 37(1), 259–268.

Li, S., Kalidindi, S., & Beyerlein, I. (2005). A crystal plasticity finite element analysis of texture evolution in equal channel angular extrusion. Materials Science and Engineering: A, 410, 207–212.

Basu, S., Barsoum, M., & Kalidindi, S. (2006). Sapphire: A kinking nonlinear elastic solid. Journal of applied physics, 99(6), 063501.

Kalidindi, S., & Pathak, S. (2008). Determination of the effective zero-point and the extraction of spherical nanoindentation stress–strain curves. Acta Materialia, 56(14), 3523–3532.

Fullwood, D., Niezgoda, S., & Kalidindi, S. (2008). Microstructure reconstructions from 2-point statistics using phase-recovery algorithms. Acta Materialia, 56(5), 942–948.

Li, D., Garmestani, H., Alamo, R., & Kalidindi, S. (2003). The role of crystallinity in the crystallographic texture evolution of polyethylenes during tensile deformation. Polymer, 44(18), 5355–5367.

Abusafieh, A., Gobran, R., & Kalidindi, S. (1997). Synthesis and characterization of a poly (methyl methacrylate-acrylic acid) copolymer for bioimplant applications. Journal of applied polymer science, 63(1), 75–87.

Knezevic, M., Levinson, A., Harris, R., Mishra, R., Doherty, R., & Kalidindi, S. (2010). Deformation twinning in AZ31: influence on strain hardening and texture evolution. Acta Materialia, 58(19), 6230–6242.

Fullwood, D., Niezgoda, S., Adams, B., & Kalidindi, S. (2010). Microstructure sensitive design for performance optimization. Progress in Materials Science, 55(6), 477–562.

Asgari, S., El-Danaf, E., Shaji, E., Kalidindi, S., & Doherty, R. (1998). The secondary hardening phenomenon in strain-hardened MP35N alloy. Acta materialia, 46(16), 5795–5806.

Knezevic, M., & Kalidindi, S. (2007). Fast computation of first-order elastic–plastic closures for polycrystalline cubic-orthorhombic microstructures. Computational Materials Science, 39(3), 643–648.

Abusafieh, A., Siegler, S., & Kalidindi, S. (1997). Development of self-anchoring bone implants. I. Processing and material characterization. Journal of biomedical materials research, 38(4), 314–327.

Brodkin, D., Zavaliangos, A., Kalidindi, S., & Barsoum, M. (1999). Ambient-and High-Temperature Properties of Titanium Carbide–Titanium Boride Composites Fabricated by Transient Plastic Phase Processing. Journal of the American Ceramic Society, 82(3), 665–672.

Fullwood, D., Adams, B., & Kalidindi, S. (2007). Generalized Pareto front methods applied to second-order material property closures. Computational Materials Science, 38(4), 788–799.

Li, S., Van Houtte, P., & Kalidindi, S. (2004). A quantitative evaluation of the deformation texture predictions for aluminium alloys from crystal plasticity finite element method. Modelling and Simulation in Materials Science and Engineering, 12(5), 845.

Kalidindi, S., & Anand, L. (1993). Large deformation simple compression of a copper single crystal. Metallurgical Transactions A, 24(4), 989–992.

Barsoum, M., El-Raghy, T., Brodkin, D., Zavaliangos, A., & Kalidindi, S.. (1999). Synthesis of 312 phases and composites thereof.

Pathak, S., Cambaz, Z., Kalidindi, S., Swadener, J., & Gogotsi, Y. (2009). Viscoelasticity and high buckling stress of dense carbon nanotube brushes. Carbon, 47(8), 1969–1976.

Knezevic, M., Kalidindi, S., & Fullwood, D. (2008). Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals. International Journal of Plasticity, 24(7), 1264–1276.

Li, D., Garmestani, H., Kalidindi, S., & Alamo, R. (2001). Crystallographic texture evolution in high-density polyethylene during uniaxial tension. Polymer, 42(11), 4903–4913.

Kalidindi, S., & Duvvuru, H. (2005). Spectral methods for capturing crystallographic texture evolution during large plastic strains in metals. Acta Materialia, 53(13), 3613–3623.

Ivosevic, M., Knight, R., Kalidindi, S., Palmese, G., & Sutter, J. (2005). Adhesive/cohesive properties of thermally sprayed functionally graded coatings for polymer matrix composites. Journal of Thermal Spray Technology, 14(1), 45–51.

Wu, X., Proust, G., Knezevic, M., & Kalidindi, S. (2007). Elastic–plastic property closures for hexagonal close-packed polycrystalline metals using first-order bounding theories. Acta Materialia, 55(8), 2729–2737.

Barsoum, M., Zavaliangos, A., Kalidindi, S., El-Raghy, T., & Brodkin, D. (1995). The transient plastic phase processing of ceramic-ceramic composites. Jom, 47(11), 52–55.

Knezevic, M., Kalidindi, S., & Mishra, R. (2008). Delineation of first-order closures for plastic properties requiring explicit consideration of strain hardening and crystallographic texture evolution. International Journal of Plasticity, 24(2), 327–342.

Fullwood, D., Adams, B., & Kalidindi, S. (2008). A strong contrast homogenization formulation for multi-phase anisotropic materials. Journal of the Mechanics and Physics of Solids, 56(6), 2287–2297.

Kalidindi, S., Duvvuru, H., & Knezevic, M. (2006). Spectral calibration of crystal plasticity models. Acta Materialia, 54(7), 1795–1804.

Kalidindi, S., Donohue, B., & Li, S. (2009). Modeling texture evolution in equal channel angular extrusion using crystal plasticity finite element models. International Journal of Plasticity, 25(5), 768–779.

Garmestani, H., Kalidindi, S., Williams, L., Bacaltchuk, C., Fountain, C., Lee, E., & Es-Said, O. (2002). Modeling the evolution of anisotropy in Al–Li alloys: application to Al–Li 2090-T8E41. International Journal of Plasticity, 18(10), 1373–1393.

Kalidindi, S., Bhattacharyya, A., & Doherty, R. (2003). How do polycrystalline materials deform plastically?. Advanced Materials, 15(16), 1345–1348.

Seefeldt, M., Delannay, L., Peeters, B., Kalidindi, S., & Van Houtte, P. (2001). A disclination-based model for grain subdivision. Materials Science and Engineering: A, 319, 192–196.

Pathak, S., Kalidindi, S., Klemenz, C., & Orlovskaya, N. (2008). Analyzing indentation stress–strain response of LaGaO3 single crystals using spherical indenters. Journal of the European Ceramic Society, 28(11), 2213–2220.

Fullwood, D., Kalidindi, S., Niezgoda, S., Fast, A., & Hampson, N. (2008). Gradient-based microstructure reconstructions from distributions using fast Fourier transforms. Materials Science and Engineering: A, 494(1-2), 68–72.

Ivosevic, M., Knight, R., Kalidindi, S., Palmese, G., & Sutter, J. (2006). Solid particle erosion resistance of thermally sprayed functionally graded coatings for polymer matrix composites. Surface and Coatings Technology, 200(16-17), 5145–5151.

Adams, B., Lyon, M., Henrie, B., Kalidindi, S., & Garmestani, H. (2002). Spectral integration of microstructure and design. In Materials Science Forum (pp. 487–492).

Binci, M., Fullwood, D., & Kalidindi, S. (2008). A new spectral framework for establishing localization relationships for elastic behavior of composites and their calibration to finite-element models. Acta Materialia, 56(10), 2272–2282.

Kalidindi, S. (1992). Polycrystal plasticity: constitutive modeling and deformation processing. (Doctoral dissertation, Massachusetts Institute of Technology).

Salem, A., Langdon, T., McNelley, T., Kalidindi, S., & Semiatin, S. (2006). Strain-path effects on the evolution of microstructure and texture during the severe-plastic deformation of aluminum. Metallurgical and Materials Transactions A, 37(9), 2879–2891.

Pathak, S., Kalidindi, S., Moser, B., Klemenz, C., & Orlovskaya, N. (2008). Analyzing indentation behavior of LaGaO3 single crystals using sharp indenters. Journal of the European Ceramic Society, 28(10), 2039–2047.

Hussey, T., Koczak, M., Smith, R., & Kalidindi, S. (1997). Synthesis of nickel aluminides by vacuum plasma spraying and exothermic in-situ reactions. Materials Science and Engineering: A, 229(1-2), 137–146.

Knezevic, M., Al-Harbi, H., & Kalidindi, S. (2009). Crystal plasticity simulations using discrete Fourier transforms. Acta materialia, 57(6), 1777–1784.

Kalidindi, S., Landi, G., & Fullwood, D. (2008). Spectral representation of higher-order localization relationships for elastic behavior of polycrystalline cubic materials. Acta Materialia, 56(15), 3843–3853.

Nien, Y..H., Kalidindi, S., & Siegler, S. (2001). Fixation strength of swellable bone anchors in low-density polyurethane foam. Journal of Biomedical Materials Research: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials, 58(2), 137–146.

Ivosevic, M., Knight, R., Kalidindi, S., Palmese, G., & Sutter, J. (2003). Erosion/oxidation resistant coatings for high temperature polymer composites. High Performance Polymers, 15(4), 503–517.

Pathak, S., Stojakovic, D., & Kalidindi, S. (2009). Measurement of the local mechanical properties in polycrystalline samples using spherical nanoindentation and orientation imaging microscopy. Acta Materialia, 57(10), 3020–3028.

Niezgoda, S., Fullwood, D., & Kalidindi, S. (2008). Delineation of the space of 2-point correlations in a composite material system. Acta Materialia, 56(18), 5285–5292.

Pathak, S., Stojakovic, D., Doherty, R., & Kalidindi, S. (2009). Importance of surface preparation on the nano-indentation stress-strain curves measured in metals. Journal of Materials Research, 24(3), 1142–1155.

Houskamp, J., Proust, G., & Kalidindi, S. (2007). Integration of microstructure-sensitive design with finite element methods: elastic-plastic case studies in FCC polycrystals. International Journal for Multiscale Computational Engineering, 5(3-4).

Vemuganti, A., Siegler, S., Abusafieh, A., & Kalidindi, S. (1997). Development of self-anchoring bone implants. II. Bone-implant interface characteristics in vitro. Journal of biomedical materials research, 38(4), 328–336.

Kalidindi, S., & Houskamp, J. (2007). Application of the spectral methods of microstructure design to continuous fiber-reinforced composites. Journal of composite materials, 41(8), 909–930.

Shaji, E., Kalidindi, S., & Doherty, R. (1999). Influence of cold-work and aging heat treatment on strength and ductility of MP35N. Materials Science and Engineering: A, 272(2), 371–379.

Format incollection not supported yet!

Niezgoda, S., Turner, D., Fullwood, D., & Kalidindi, S. (2010). Optimized structure based representative volume element sets reflecting the ensemble-averaged 2-point statistics. Acta Materialia, 58(13), 4432–4445.

Landi, G., Niezgoda, S., & Kalidindi, S. (2010). Multi-scale modeling of elastic response of three-dimensional voxel-based microstructure datasets using novel DFT-based knowledge systems. Acta Materialia, 58(7), 2716–2725.

Gualtieri, G., Gobran, R., Nien, Y.H., & Kalidindi, S. (2001). Swelling of crosslinked poly (methylmethacrylate-acrylic acid) copolymers in serum and saline solutions. Journal of applied polymer science, 79(9), 1653–1664.

Kalidindi, S., Zhen, T., & Barsoum, M. (2006). Macroscale constitutive modeling of kinking nonlinear elastic solids. Materials Science and Engineering: A, 418(1-2), 95–98.

Li, S., Donohue, B., & Kalidindi, S. (2008). A crystal plasticity finite element analysis of cross-grain deformation heterogeneity in equal channel angular extrusion and its implications for texture evolution. Materials Science and Engineering: A, 480(1-2), 17–23.

Abusafieh, A., & Kalidindi, S. (1998). Effect of water absorption on the izod impact energy of crosslinked poly (methyl methacrylate-acrylic acid) and their composites. Polymer composites, 19(1), 23–30.

Pathak, S., Shaffer, J., & Kalidindi, S. (2009). Determination of an effective zero-point and extraction of indentation stress–strain curves without the continuous stiffness measurement signal. Scripta Materialia, 60(6), 439–442.

Adams, B., Kalidindi, S., & Garmestani, H. (2001). Spectral representation of microstructure evolution in polycrystals. In Microstructure Modeling and Prediction During Thermomechanical Processing(as held at the 2001 Fall TMS Meeting) (pp. 68–72).

Wu, X., Kalidindi, S., Necker, C., & Salem, A. (2008). Modeling anisotropic stress-strain response and crystallographic texture evolution in $\alpha$-titanium during large plastic deformation using taylor-type models: influence of initial texture and purity. Metallurgical and materials transactions A, 39(12), 3046.

Duvvuru, H., Wu, X., & Kalidindi, S. (2007). Calibration of elastic localization tensors to finite element models: Application to cubic polycrystals. Computational materials science, 41(2), 138–144.

Bronkhorst, C., Kalidindi, S., & Anand, L. (1970). An experimental and analytical study of the evolution of crystallographic texturing in FCC materials. Textures and Microstructures, 14.

Peeters, B., Kalidindi, S., Teodosiu, C., Van Houtte, P., & Aernoudt, E. (2002). Modelling microstructure-based anisotropy in BCC polycrystals during changing strain paths. In Solid State Phenomena (pp. 163–168).

Ivosevic, M., Knight, R., Kalidindi, S., Palmese, G., Tsurikov, A., & Sutter, J. (2003). Optimal substrate preheating model for thermal spray deposition of thermosets onto polymer matrix composites. In International Thermal Spray Conference and Exposition.

Fullwood, D., Kalidindi, S., Adams, B., & Ahmadi, S. (2009). A discrete Fourier transform framework for localization relations. Computers, Materials & Continua (CMC), 9(1), 25.

Kalidindi, S., Niezgoda, S., Landi, G., Vachhani, S., & Fast, T. (2010). A novel framework for building materials knowledge systems. Computers, Materials, & Continua, 17(2), 103–125.

Kalidindi, S., & Ahmad, P. (1997). A numerical investigation of the mechanics of swelling-type intramedullary hip implants. Journal is required!.

Pathak, S., Swadener, J., Kalidindi, S., Courtland, H.W., Jepsen, K., & Goldman, H. (2011). Measuring the dynamic mechanical response of hydrated mouse bone by nanoindentation. Journal of the mechanical behavior of biomedical materials, 4(1), 34–43.

Fast, T., Niezgoda, S., & Kalidindi, S. (2011). A new framework for computationally efficient structure–structure evolution linkages to facilitate high-fidelity scale bridging in multi-scale materials models. Acta Materialia, 59(2), 699–707.

Peeters, B., Seefeldt, M., Kalidindi, S., Van Houtte, P., & Aernoudt, E. (2001). The incorporation of dislocation sheets into a model for plastic deformation of bcc polycrystals and its influence on r-values. Materials Science and Engineering: A, 319, 188–191.

Saerens, A., Van Houtte, P., & Kalidindi, S. (2001). Finite element modeling of microscale thermal residual stresses in Al interconnects. Journal of Materials Research, 16(4), 1112–1122.

Kalidindi, S. (2004). A crystal plasticity framework for deformation twinning. Continuum Scale Simulation of Engineering Materials: Fundamentals–Microstructures–Process Applications, 543–560.

Shaji, E., Kalidindi, S., Doherty, R., & Sedmak, A. (2003). Fracture properties of multiphase alloy MP35N. Materials Science and Engineering: A, 349(1-2), 313–317.

Stojakovic, D., Doherty, R., Kalidindi, S., & Landgraf, F. (2008). Thermomechanical Processing for Recovery of Desired $$$\$$\backslash$left$\backslash$langle $\$001$\$$\backslash$right$\backslash$rangle$\$ $$ Fiber Texture in Electric Motor Steels. Metallurgical and Materials Transactions A, 39(7), 1738–1746.

Siegler, S., Kalidindi, S., & Abusafieh, A.. (1998). Swelling type copolymeric composite material with self-fixation characteristics.

Kalidindi, S., Knezevic, M., Niezgoda, S., & Shaffer, J. (2009). Representation of the orientation distribution function and computation of first-order elastic properties closures using discrete Fourier transforms. Acta Materialia, 57(13), 3916–3923.

Gualtieri, G., Siegler, S., Hume, E., & Kalidindi, S. (2000). Biological and mechanical characteristics of the interface between a new swelling anchor and bone. Journal of Orthopaedic Research, 18(3), 494–499.

Ivosevic, M., Knight, R., Kalidindi, S., Palmese, G., & Sutter, J.. (2003). Microstructure and properties of thermally sprayed functionally graded coatings for polymeric substrates.

Fast, T., Knezevic, M., & Kalidindi, S. (2008). Application of microstructure sensitive design to structural components produced from hexagonal polycrystalline metals. Computational Materials Science, 43(2), 374–383.

Niezgoda, S., Kalidindi, S., Hu, X., Cingara, G., Wilkinson, D., Jain, M., Wu, P., Mishra, R., Arafin, M., & Szpunar, J. (2010). Applications of the phase-coded generalized hough transform to feature detection, analysis, and segmentation of digital microstructures. Computers, Materials, & Continua, 14(2), 79–98.

Duvvuru, H., & Kalidindi, S. (2004). Processing solutions for targeted textures using spectral methods. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (pp. 683–684).

Shaji, E., Kalidindi, S., Doherty, R., & Sedmak, A. (2003). Plane strain fracture toughness of MP35N in aged and unaged conditions measured using modified CT specimens. Materials Science and Engineering: A, 340(1-2), 163–169.

Fast, T., & Kalidindi, S. (2011). Formulation and calibration of higher-order elastic localization relationships using the MKS approach. Acta Materialia, 59(11), 4595–4605.

Shaffer, J., Knezevic, M., & Kalidindi, S. (2010). Building texture evolution networks for deformation processing of polycrystalline fcc metals using spectral approaches: Applications to process design for targeted performance. International Journal of Plasticity, 26(8), 1183–1194.

Brodkin, D., Barsoum, M., Zavaliangos, A., & Kalidindi, S. (2009). Processing-Structure-Properties Relations in Titanium-Boron-Carbon Ceramic-Ceramic Composites Produced by Transient Plastic Phase Processing. In 18th Annual Conference on Composites and Advanced Ceramic Materials-A (pp. 121).

Niezgoda, S., Yabansu, Y., & Kalidindi, S. (2011). Understanding and visualizing microstructure and microstructure variance as a stochastic process. Acta Materialia, 59(16), 6387–6400.

Pathak, S., Michler, J., Wasmer, K., & Kalidindi, S. (2012). Studying grain boundary regions in polycrystalline materials using spherical nano-indentation and orientation imaging microscopy. Journal of Materials Science, 47(2), 815–823.

Peeters, B., Teodosiu, C., Kalidindi, S., Van Houtte, P., & Aernoudt, E. (2001). Modelling of the evolution of dislocation sheets during strain-path changes and their influence on the Bauschinger effect of BCC polycrystals. Le Journal de Physique IV, 11(PR5), Pr5–119.

Kalidindi, S., Houskamp, J., Proust, G., & Duvvuru, H. (2005). Microstructure sensitive design with first order homogenization theories and finite element codes. In Materials Science Forum (pp. 23–30).

Kalidindi, S., Smith, R., Koczak, M., & Hussey, T. (1997). Synthesis of nickel aluminides by vacuum plasma spraying and exothermic in-situ reactions. Materials Science & Engineering A, 1(229), 137–146.

Landi, G., & Kalidindi, S. (2010). Thermo-elastic localization relationships for multi-phase composites. Computers, Materials, & Continua, 16(3), 273–293.

Doherty, R., Stojakovic, D., Landgraf, F., & Kalidindi, S. (2007). Retention of the< 001> Fiber Texture for Fe-Si Electric Motor Steels. In Materials science forum (pp. 497–502).

Bhattacharyya, A., El-Danaf, E., Kalidindi, S., & Doherty, R. (2000). Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminium. In Key Engineering Materials (pp. 183–188).

Kalidindi, S., & Fullwood, D. (2007). Spectral methods for microstructure design. Jom, 59(9), 26–31.

Wargo, E., Hanna, A., Cecen, A., Kalidindi, S., & Kumbur, E. (2012). Selection of representative volume elements for pore-scale analysis of transport in fuel cell materials. Journal of power sources, 197, 168–179.

Knight, R., Ivosevic, M., Twardowski, T., Kalidindi, S., Sutter, J., Kim, D., & Gray, H. (2002). Development of HVOF sprayed erosion/oxidation resistant coatings for composite structural components in propulsion systems. Journal is required!.

Brodkin, D., Zavaliangos, A., Kalidindi, S., & Barsoum, M. (1995). Microstructural optimization and mechanical properties of titanium carbide-titanium boride composites fabricated by transient plastic phase processing. Processing and Fabrication of Advanced Materials IV, 189–198.

Peeters, B., Van Houtte, P., Kalidindi, S., & Aernoudt, E. (2001). A theoretical investigation of the contribution of texture and dislocation sheets on strain path change effects in BCC metals. Le Journal de Physique IV, 11(PR4), Pr4–365.

Kalidindi, S., Niezgoda, S., & Salem, A. (2011). Microstructure informatics using higher-order statistics and efficient data-mining protocols. Jom, 63(4), 34–41.

Abusafieh, A., Kalidindi, S., & Franco, E. (1994). An Experimental and Numerical Study of Response of 3-D Braided Structural Textile Composites. In PROCEEDINGS-AMERICAN SOCIETY FOR COMPOSITES (pp. 1118–1118).

Kalidindi, S. (2004). Micro-Mechanical Finite Element Models for Crystal Plasticity. Continuum Scale Simulation of Engineering Materials: Fundamentals–Microstructures–Process Applications, 529–542.

McDowell, D., Ghosh, S., & Kalidindi, S. (2011). Representation and computational structure-property relations of random media. Jom, 63(3), 45.

Wargo, E., Schulz, V., Cecen, A., Kalidindi, S., & Kumbur, E. (2013). Microstructure-driven analysis of two-phase transport in diffusion media of PEFCs. ECS Transactions, 50(2), 513.

El-Raghy, T., Zavaliangos, A., Barsoum, M., & Kalidindi, S. (1996). Processing and properties of Ti sub 3 SiC sub 2 TN. Processing and Fabrication of Advanced Materials V, 631–640.

Sosa, J., Koduri, S., Dixit, V., Collins, P., Niezgoda, S., Kalidindi, S., & Fraser, H. (2010). Application of novel techniques to the three-dimensional characterization of microstructural features in $\alpha$+ $\beta$ titanium alloys. Microscopy and Microanalysis, 16(S2), 722–723.

Al-Harbi, H., Knezevic, M., & Kalidindi, S. (2010). Spectral approaches for the fast computation of yield surfaces and first-order plastic property closures for polycrystalline materials with cubic-triclinic textures. Computers, Materials, & Continua, 15(2), 153–172.

Levinson, A., Mishra, R., Doherty, R., & Kalidindi, S. (2012). Microstructure evolution during roller hemming of AZ31B magnesium sheet. Metallurgical and Materials Transactions A, 43(10), 3824–3833.

Format incollection not supported yet!

Bhattacharyya, A., El-Danaf, E., Kalidindi, S., & Doherty, R. (2000). PART 1-Crystal Plasticity and Dislocation Dynamics-Evolution of Grain-Scale Microstructure during Large Strain Simple Compression of Polycrystalline Aluminium. Key Engineering Materials, 177, 183–188.

Kalidindi, S., Houskamp, J., & Proust, G. (2004). Coupling of Microstructure Sensitive Design With Finite Element Codes: Design of an Orthotropic Plate With a Circular Hole Loaded in Tension. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (pp. 657–658).

Peeters, B., Houtte, P., Kalidindi, S., & Aernoudt, E. (2001). Microstructures-Mechanical properties-A theoretical investigation of the contribution of texture and dislocation sheets on strain path change effects in BCC metals. Journal de Physique-Colloques, 11(4), 365–372.

Pathak, S., Cambaz, Z., Kalidindi, S., Swadener, J., & Gogotsi, Y. (2009). Publication E. Viscoelasticity and High Buckling Stress of Dense Carbon Nanotube Brushes. Development and Validation of a Novel Data Analysis Procedure for Spherical Nanoindentation.

Format techreport not supported yet!

Peeters, B., Van Houtte, P., Aernoudt, E., & Kalidindi, S. (2001). The influence of dislocation sheets on yield surface predictions for bcc polycrystals. In Proc. ESAFORM-4, 4th International Conference on Materials Forming (pp. 425–428).

Pathak, S., Shaffer, J., & Kalidindi, S. (2009). Publication B. Determination of an Effective Zero-pint and Extraction of Indentation Stress-Strain Curves without the Continuous Stiffness Measurement Signal. Development and Validation of a Novel Data Analysis Procedure for Spherical Nanoindentation, 60, 439–442.

Wu, X., Kalidindi, S., Necker, C., & Salem, A. (Year is required!). Anisotropic stress-strain response and crystallographic texture evolution in a-titanium during large plastic deformation: Influence of initial texture and purity. Journal is required!.

Format techreport not supported yet!

Donohue, B., Ambrus, A., & Kalidindi, S. (2012). Critical evaluation of the indentation data analyses methods for the extraction of isotropic uniaxial mechanical properties using finite element models. Acta Materialia, 60(9), 3943–3952.

Radovic, M., Barsoum, M., Ganguly, A., Zhen, T., Finkel, P., Kalidindi, S., & Lara-Curzio, E. (2006). On the elastic properties and mechanical damping of Ti sub (3) SiC sub (2), Ti sub (3) GeC sub (2), Ti sub (3) Si sub (0. 5) Al sub (0. 5) C sub (2) and Ti sub (2) AlC in the 300-1573 K temperature range. Acta Materialia, 54(10), 2757–2767.

Rozanski, A. (1999). Investigation of the reaction paths and liquid phase dependence of the Ni-Al SHS reaction. (Doctoral dissertation, Drexel University).

Brodkin, D., Zavaliangos, A., Kalidindi, S., & Barsoum, M. (1999). Mechanical, Chemical, and Thermal Properties-Ambient-and High-Temperature Properties of Titanium Carbide-Titanium Boride Composites Fabricated by Transient Plastic Phase Processing. Journal of the American Ceramic Society-Including Communications of the Amer Ceramic Soc, 82(3).

Kalidindi, S., & Pathak, S. (2009). Publication A. Determination of the effective zero-point and the extraction of spherical nanoindentation stress-strain curves. Development and Validation of a Novel Data Analysis Procedure for Spherical Nanoindentation, 56, 3533–3542.

Format techreport not supported yet!

Bronkhorst, C., Kalidindi, S., Zavaliangos, A., & Thamburaja, P. (2010). Special issue in honor of Lallit Anand. International Journal of Plasticity, 8(26), 1071–1072.

Wargo, E., Hanna, A., \cCe\ccen, A., Johnson, C., Kalidindi, S., & Kumbur, E. (2011). Focused ion beam tomography of diffusion media for fuel cells. Microscopy and Microanalysis, 17(S2), 962–963.

Kalidindi, S., & Abusafieh, A. (1997). A new class of swellable materials for orthopaedic bioimplants. In International Symposium on Processing and Fabrication of Advanced Materials VI, Singapore.

Gualtieri, G., Siegler, S., Hume, E., Abusafieh, A., & Kalidindi, S. (1998). In-Vivo Evaluation of a New Class of Swelling-Type Materials for Bone Anchor Applications. In ANNUAL MEETING-SOCIETY FOR BIOMATERIALS IN CONJUNCTION WITH THE INTERNATIONAL BIOMATERIALS SYMPOSIUM (pp. 409–409).

Duvvuru, H., Knezevic, M., Mishra, R., & Kalidindi, S. (2007). Application of microstructure sensitive design to FCC polycrystals. In Materials science forum (pp. 675–680).

Gualtieri, G., Gobran, R., Hume, E., Siegler, S., Kalidindi, S., & Maxian, S. (1999). A New Class of Swelling Polymeric Materials for Orthopaedic Applications: The Effect of Swelling Ration on Bone Cell Behavior. In ANNUAL MEETING-SOCIETY FOR BIOMATERIALS IN CONJUNCTION WITH THE INTERNATIONAL BIOMATERIALS SYMPOSIUM (pp. 536–536).

Cecen, A., Wargo, E., Hanna, A., Turner, D., Kalidindi, S., & Kumbur, E. (2011). Microstructure analysis tools for quantification of key structural properties of fuel cell materials. ECS Transactions, 41(1), 679.

Binci, M., & Kalidindi, S. (2004). Evaluation of Generalized Hashin-Shtrikman Bounds Using Finite Element Models. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (pp. 669–670).

Barsoum, M., Murugaiah, A., Kalidindi, S., & Gogotsi, Y. (Year is required!). Kink Bands and Deformation in Graphite. Journal is required!.

Fullwood$^1$, D., Kalidindi, S., & Adams, B. (2008). FAST FOURIER METHODS APPLIED TO PERTURBATION-BASED HOMOGENIZATION RELATIONS. Journal is required!.

Garmestani, H., Kalidindi, S., Fountain, C., Williams, L., Lee, E., & Es-Said, S. (Year is required!). EVOLUTION OF ANISOTROPY IN PRECIPITATION HARDENING AL-LI2090-T8E41 ALLOY. LiMAT-2001, 305.

Abusafieh, A., & Kalidindi, S. (1995). MD-Vol. 56, Recent Advances in Composite Materials. In Recent Advances in Composite Materials: Presented at the 1995 Joint ASME Applied Mechanics and Materials Summer Meeting, Los Angeles, California, June 28-30, 1995 (pp. 215).

Li, C., Tenneti, K., Solari, D., Zavaliangos, A., Kalidindi, S., Gogotsi, Y., Sohlberg, K., & DiNardo, N. (2004). DNET: The Drexel Nano Engineering Track.. MRS Online Proceedings Library (OPL), 827.

Kalidindi, S., Niezgoda, S., Binci, M., & Knezevic, M. (2008). MICROSTRUCTURE-PROPERTY-PROCESSING LINKAGES USING DISCRETE FOURIER TRANSFORMS. Journal is required!.

Kalidindi, S., Houskamp, J., Lyons, M., & Adams, B. (2002). Materials Design by Spectral Methods. In 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization (pp. 5570).

Naidu, N. (2001). Self-expanding Polymeric Stents. (Doctoral dissertation, Drexel University).

Format techreport not supported yet!

Ivosevic, M., Knight, R., Kalidindi, S., Palmese, G., & Sutter, J. (2004). Solid Particle Erosion Resistance of Thermally Sprayed Functionally Graded Polymer/Ceramic Coatings. In ITSC 2004: International Thermal Spray Conference 2004: Advances in Technology and Application (pp. 498–503).

Cecen, A., Wargo, E., Hanna, A., Turner, D., Kalidindi, S., & Kumbur, E. (2012). 3-D microstructure analysis of fuel cell materials: spatial distributions of tortuosity, void size and diffusivity. Journal of The Electrochemical Society, 159(3), B299.

Fullwood, D., Adams, B., Stevens, K., Niezgoda, S., & Kalidindi, S. (2008). Spectral Methods in the Statistical Description and Design of Microstructure. Materials Processing and Texture, 687–699.

Brodkin, D., Barsoum, M., Kalidindi, S., & Zavaliangos, A. (1996). Optimization of microstructure and its effect on mechanical properties of TiC sub x-TiB sub 2-Ti sub 3 B sub 4 composites produced by transient plastic phase processing. RoPM’96, 587–595.

Pathak, S., Stojakovic, D., Doherty, R., & Kalidindi, S. (2009). Publication C. Importance of Surface Preparation on the Nano-Indentation Stress-Strain Curves Measured in Metals. Development and Validation of a Novel Data Analysis Procedure for Spherical Nanoindentation.

Delannay, L., Kalidindi, S., & Van Houtte, P. (2000). Cold rolling of fcc polycrystals investigated by 2-grains and N-grains interaction models. Proc. Euromat 2000, Advances in Mechanical Behaviour, Plasticity and Damage, 341–346.

Pathak, S., Vachhani, S., Jepsen, K., Goldman, H., & Kalidindi, S. (2012). Assessment of lamellar level properties in mouse bone utilizing a novel spherical nanoindentation data analysis method. Journal of the mechanical behavior of biomedical materials, 13, 102–117.

Panchal, J., Kalidindi, S., & McDowell, D. (2013). Key computational modeling issues in integrated computational materials engineering. Computer-Aided Design, 45(1), 4–25.

Format techreport not supported yet!

Format techreport not supported yet!

Swaminathan, V., Kalidindi, S., & Koczak, M. (1997). Simulation of self-propagating high-temperature synthesis using finite element method. Composites and functionally graded materials, 65–72.

Format techreport not supported yet!

Al-Harbi, H., Landi, G., & Kalidindi, S. (2012). Multi-scale modeling of the elastic response of a structural component made from a composite material using the materials knowledge system. Modelling and Simulation in Materials Science and Engineering, 20(5), 055001.

Li, C., Tenneti, K., Solari, D., Zavaliangos, A., Kalidindi, S., Gogotsi, Y., Sohlberg, K., & DiNardo, N. (2004). DNET: GRUPO DREXEL DE NANO INGENIER\’IA. Journal of Materials Education, 26(3-4), 213–220.

Kalidindi, S., Niezgoda, S., Landi, G., & Fast, T. (2011). Building Knowledge Systems for the Design and Processing of Materials with Improved Performance Characteristics. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.[np]. Feb.

Coratolo, A. (2006). Characterization of La-Cr-O Thin Films for Use as Protective Coatings for Cr Containing Alloy Interconnects in Solid Oxide Fuel Cells. (Doctoral dissertation, Drexel University).

Format incollection not supported yet!

Kalidindi, S. (2001). Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fcc metals. International Journal of Plasticity, 17(6), 837–860.

Qidwai, S., Turner, D., Niezgoda, S., Lewis, A., Geltmacher, A., Rowenhorst, D., & Kalidindi, S. (2012). Estimating the response of polycrystalline materials using sets of weighted statistical volume elements. Acta Materialia, 60(13-14), 5284–5299.

Wargo, E., Schulz, V., \cCe\ccen, A., Kalidindi, S., & Kumbur, E. (2013). Resolving macro-and micro-porous layer interaction in polymer electrolyte fuel cells using focused ion beam and X-ray computed tomography. Electrochimica Acta, 87, 201–212.

Wargo, E., Hanna, A., Cecen, A., Kalidindi, S., & Kumbur, E. (2011). A representative volume element approach for pore-scale modeling of fuel cell materials. ECS Transactions, 41(1), 131.

Kalidindi, S. (2012). Computationally efficient, fully coupled multiscale modeling of materials phenomena using calibrated localization linkages. International Scholarly Research Notices, 2012.

Niezgoda, S., Turner, D., Fullwood, D., & Kalidindi, S.. (2010). Evaluation and Generation of Representative Volume Elements- A Characterization and Modeling Based Approach.

Lewis, A., Qidwai, M., Kalidindi, S., Niezgoda, S., & Geltmacher, A.. (2010). Finite Element Analysis of Large Three-Dimensional Microstructural Datasets.

Vachhani, S., Doherty, R., & Kalidindi, S. (2013). Effect of the continuous stiffness measurement on the mechanical properties extracted using spherical nanoindentation. Acta Materialia, 61(10), 3744–3751.

Hampson, N., Jepsen, K., Kalidindi, S., Duarte, G., & Goldman, H.. (2011). Regional Variation in Canal Volume of the Human Tibial Cortex.

Pathak, S., Kalidindi, S., Courtland, H., Jepsen, K., & Goldman, H. (2007). Improved analysis of bone nano-mechanical properties using a novel nanoindentation technique. In Journal of Bone and Mineral Research (pp. S480–S480).

Asahina, T., Danninger, H., Daux, J., Davis, K., Doherty, R., Drew, G., Driver, J., Embury, J., Ernst, P., Estrin, Y., & others (1999). Allen, AJ 215 Arrell, DJ 310 Arsenault, RJ 57. Materials Science and Engineering, 272, 465–466.

Azzouz, F., Balasubrahmanyam, V., Batista, J., Biswas, S., Buono, V., Cailletaud, G., Calderon-Moreno, J., Chan, K., Chen, Z., Choi, S., & others (2002). Ahn, WS 196 Antretter, T. 30 Asthana, R. 99. Materials Science and Engineering, 336, 323.

Peeters, B., Teodosiu, C., Kalidindi, S., Houtte, P., & Aernoudt, E. (2001). Meso-macro scale transitions-1 Dislocation-based transitions-Modelling of the evolution of dislocation sheets during strain-path changes and their influence on the Bauschinger effect of BCC. Journal de Physique-Colloques, 11(5), 119–126.

Adams, B., Kalidindi, S., & Fullwood, D.. (2012). Microstructure sensitive design for performance optimization.

\cCe\ccen, A., Fast, T., Kumbur, E., & Kalidindi, S. (2014). A data-driven approach to establishing microstructure–property relationships in porous transport layers of polymer electrolyte fuel cells. Journal of Power Sources, 245, 144–153.

Niezgoda, S., Kanjarla, A., & Kalidindi, S. (2013). Novel microstructure quantification framework for databasing, visualization, and analysis of microstructure data. Integrating Materials and Manufacturing Innovation, 2(1), 54–80.

Gupta, A., Cecen, A., Goyal, S., Singh, A., & Kalidindi, S. (2013). Multiscale model for non-metallic inclusions/steel composite system using data science enabled structure-property linkages. In Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME) (pp. 57–62).

Deshpande, P., Gautham, B., Cecen, A., Kalidindi, S., Agrawal, A., & Choudhary, A. (2013). Application of statistical and machine learning techniques for correlating properties to composition and manufacturing processes of steels. In Proceedings of the 2nd world congress on integrated computational materials engineering (ICME) (pp. 155–160).

Levinson, A., Mishra, R., Doherty, R., & Kalidindi, S. (2013). Influence of deformation twinning on static annealing of AZ31 Mg alloy. Acta materialia, 61(16), 5966–5978.

Salem, A., Pilchak, A., & Kalidindi, S. (2012). Calculation of Kearns Number Plots(KNP) and Kearns Number Maps(KNM) from EBSD Data: Application to Ti-6 Al-4 V with Bimodal Microstructure. In AIP Conference Proceedings.

Salem, A., Turner, D., Satko, D., Shaffer, J., Niezgoda, S., & Kalidindi, S. (2012). Quantifying Ti-6 Al-4 V bimodal microstructure using microstructure informatics. In AIP Conference Proceedings.

Kalidindi, S., Tiley, J., & Semiatin, S. (2012). Crystal Plasticity Finite Element Analysis of Hot Deformation of Ti-6 Al-4 V with Lamellar Microstructure Ayman Salem. In AIP Conference Proceedings.

Satko, D., Kaufman, J., Shaffer, J., Doherty, R., & Kalidindi, S. (2012). Exploring Microstructure-Corrosion Property Correlations in 5000-Series Alloys Using Higher-Order Statistical Metrics. In AIP Conference Proceedings.

Pathak, S., & Kalidindi, S. (2011). Studying the Mechanical Response of Regions within Grains and near Grain Boundaries Using Spherical Nanoindentation. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.[np]. Feb.

Sosa, J., Koduri, S., Dixit, V., Collins, P., Niezgoda, S., Kalidindi, S., & Fraser, H. (2011). Application of Novel Techniques to the Three-Dimensional Characterization of Microstructural Features in a+ beta Titanium Alloys. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.[np]. Feb.

Litster, S., Epting, W., Wargo, E., Kalidindi, S., & Kumbur, E. (2013). Morphological analyses of polymer electrolyte fuel cell electrodes with nano-scale computed tomography imaging. Fuel Cells, 13(5), 935–945.

Wargo, E., Schulz, V., Cecen, A., Kalidindi, S., & Kumbur, E. (2012). Advanced microstructural analysis tools to quantify two-phase transport in gas diffusion layers of polymer electrolyte fuel cells. In ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY.

Format incollection not supported yet!

Dong, X., McDowell, D., Kalidindi, S., & Jacob, K. (2014). Dependence of mechanical properties on crystal orientation of semi-crystalline polyethylene structures. Polymer, 55(16), 4248–4257.

Agrawal, A., Deshpande, P., Cecen, A., Basavarsu, G., Choudhary, A., & Kalidindi, S. (2014). Exploration of data science techniques to predict fatigue strength of steel from composition and processing parameters. Integrating Materials and Manufacturing Innovation, 3(1), 90–108.

Alharbi, H., & Kalidindi, S. (2015). Crystal plasticity finite element simulations using a database of discrete Fourier transforms. International Journal of Plasticity, 66, 71–84.

Kalidindi, S., & Vachhani, S. (2014). Mechanical characterization of grain boundaries using nanoindentation. Current opinion in solid state and materials science, 18(4), 196–204.

Sha, Y., Sun, C., Zhang, F., Patel, D., Chen, X., Kalidindi, S., & Zuo, L. (2014). Strong cube recrystallization texture in silicon steel by twin-roll casting process. Acta Materialia, 76, 106–117.

Patel, D., Al-Harbi, H., & Kalidindi, S. (2014). Extracting single-crystal elastic constants from polycrystalline samples using spherical nanoindentation and orientation measurements. Acta materialia, 79, 108–116.

Format techreport not supported yet!

Yabansu, Y., Patel, D., & Kalidindi, S. (2014). Calibrated localization relationships for elastic response of polycrystalline aggregates. Acta Materialia, 81, 151–160.

Salem, A., Shaffer, J., Satko, D., Semiatin, S., & Kalidindi, S. (2014). Workflow for integrating mesoscale heterogeneities in materials structure with process simulation of titanium alloys. Integrating Materials and Manufacturing Innovation, 3(1), 322–343.

Kalidindi, S. (2015). Data science and cyberinfrastructure: critical enablers for accelerated development of hierarchical materials. International Materials Reviews, 60(3), 150–168.

Format techreport not supported yet!

Pathak, S., Riesterer, J., Kalidindi, S., & Michler, J. (2014). Understanding pop-ins in spherical nanoindentation. Applied Physics Letters, 105(16), 161913.

Knezevic, M., Ma, D., Raabe, D., Kalidindi, S., Friák, M., & Neugebauer, J. (Year is required!). Application of Spectral Methods for Anisotropy Design of Ti-Nb Polycrystals for Biomedical Applications based on ab Initio Elastic Single Crystal Constants and Fast Fourier Homogenization. In MRS Fall Conference 2008.

Ma, D., Friák, M., Knezevic, M., Kalidindi, S., Lebensohn, R., Roters, F., Neugebauer, J., & Raabe, D. (2009). Polycrystal coarse graining of elastic properties for Ti-Nb biomedical grades using ab-initio single crystal elastic constants. In International Plasticity Conference 2009.

Vachhani, S., & Kalidindi, S. (2015). Grain-scale measurement of slip resistances in aluminum polycrystals using spherical nanoindentation. Acta Materialia, 90, 27–36.

Pathak, S., & Kalidindi, S. (2015). Spherical nanoindentation stress–strain curves. Materials science and engineering: R: Reports, 91, 1–36.

Gupta, A., Cecen, A., Goyal, S., Singh, A., & Kalidindi, S. (2015). Structure–property linkages using a data science approach: application to a non-metallic inclusion/steel composite system. Acta Materialia, 91, 239–254.

Yabansu, Y., & Kalidindi, S. (2015). Calibrated Localization Relationships for Polycrystalline Aggregates by Using Materials Knowledge System. In Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering (ICME 2015) (pp. 221–228).

Poole, W., Christensen, S., Kalidindi, S., Luo, A., Madison, J., Raabe, D., & Sun, X.. (2016). Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering (ICME).

Yabansu, Y., & Kalidindi, S. (2015). Representation and calibration of elastic localization kernels for a broad class of cubic polycrystals. Acta Materialia, 94, 26–35.

Ivosevic, M., Twardowski, T., Kalidindi, S., Knight, R., Sutter, J., & Kim, D. (1990). Development of HVOF Sprayed Erosion/Oxidation Resistant Coatings for Composite Structural Components in Propulsion Systems. Journal is required!.

Kalidindi, S., & De Graef, M. (2015). Materials data science: current status and future outlook. Annual Review of Materials Research, 45, 171–193.

Format techreport not supported yet!

Kalidindi, S., Gomberg, J., Trautt, Z., & Becker, C. (2015). Application of data science tools to quantify and distinguish between structures and models in molecular dynamics datasets. Nanotechnology, 26(34), 344006.

Turner, D., & Kalidindi, S. (2016). Statistical construction of 3-D microstructures from 2-D exemplars collected on oblique sections. Acta Materialia, 102, 136–148.

Abba, M., Hunger, P., Kalidindi, S., & Wegst, U. (2016). Nacre-like hybrid films: Structure, properties, and the effect of relative humidity. Journal of the mechanical behavior of biomedical materials, 55, 140–150.

Nave, M., Allen, J., Chen-Wiegart, Y.c., Wang, J., Kalidindi, S., & Kornev, K. (2015). In situ X-ray nanotomography of metal surfaces during electropolishing. Scientific reports, 5(1), 1–10.

Steinmetz, P., Yabansu, Y., Hötzer, J., Jainta, M., Nestler, B., & Kalidindi, S. (2016). Analytics for microstructure datasets produced by phase-field simulations. Acta Materialia, 103, 192–203.

Pathak, S., Kalidindi, S., & Mara, N. (2016). Investigations of orientation and length scale effects on micromechanical responses in polycrystalline zirconium using spherical nanoindentation. Scripta Materialia, 113, 241–245.

Cecen, A., Fast, T., & Kalidindi, S. (2016). Versatile algorithms for the computation of 2-point spatial correlations in quantifying material structure. Integrating Materials and Manufacturing Innovation, 5(1), 1–15.

Liu, R., Yabansu, Y., Agrawal, A., Kalidindi, S., & Choudhary, A. (2015). Machine learning approaches for elastic localization linkages in high-contrast composite materials. Integrating Materials and Manufacturing Innovation, 4(1), 192–208.

Kalidindi, S.. (2015). Hierarchical materials informatics: novel analytics for materials data.

Vachhani, S., Doherty, R., & Kalidindi, S. (2016). Studies of grain boundary regions in deformed polycrystalline aluminum using spherical nanoindentation. International Journal of Plasticity, 81, 87–101.

Satko, D., Shaffer, J., Tiley, J., Semiatin, S., Pilchak, A., Kalidindi, S., Kosaka, Y., Glavicic, M., & Salem, A. (2016). Effect of microstructure on oxygen rich layer evolution and its impact on fatigue life during high-temperature application of $\alpha$/$\beta$ titanium. Acta Materialia, 107, 377–389.

Fast, T., Wodo, O., Ganapathysubramanian, B., & Kalidindi, S. (2016). Microstructure taxonomy based on spatial correlations: Application to microstructure coarsening. Acta Materialia, 108, 176–185.

Choudhury, A., Yabansu, Y., Kalidindi, S., & Dennstedt, A. (2016). Quantification and classification of microstructures in ternary eutectic alloys using 2-point spatial correlations and principal component analyses. Acta Materialia, 110, 131–141.

McDowell, D., & Kalidindi, S. (2016). The materials innovation ecosystem: a key enabler for the materials genome initiative. Mrs Bulletin, 41(4), 326–337.

Latypov, M., & Kalidindi, S. (Year is required!). Data science approach to homogenization and strain partitioning in isotropic dual-phase materials ICME 2016. Journal is required!.

Patel, D., & Kalidindi, S. (2016). Correlation of spherical nanoindentation stress-strain curves to simple compression stress-strain curves for elastic-plastic isotropic materials using finite element models. Acta Materialia, 112, 295–302.

Kalidindi, S., Ramakrishnan, N., Rolfes, R., Tewary, V., Zheng, X., & Atluri, S. (2010). CMC. Journal is required!.

Salem, A., Shaffer, J., Niezgoda, S., Satko, D., Kalidindi, S., Buijk, A., Semiatin, S., & Pil chak, A. (2016). Microstructure Uncertainty Propagation in Sheet Metal Forming Fe-Simulations: Springback of Commercial-Purity Titanium. In Proceedings of the 13th World Conference on Titanium (pp. 1881–1886).

Brough, D., Wheeler, D., Warren, J., & Kalidindi, S. (2017). Microstructure-based knowledge systems for capturing process-structure evolution linkages. Current Opinion in Solid State and Materials Science, 21(3), 129–140.

Weaver, J., Khosravani, A., Castillo, A., & Kalidindi, S. (2016). High throughput exploration of process-property linkages in Al-6061 using instrumented spherical microindentation and microstructurally graded samples. Integrating Materials and Manufacturing Innovation, 5(1), 192–211.

Kalidindi, S.. (2013). Materials Science and Engineering: Chapter 18. Microstructure Informatics.

Mara, N., Pathak, S., Wang, Y., Doerner, R., & Kalidindi, S. (2015). Probing nanoscale damage gradients in irradiated materials with spherical nanoindentation. Journal is required!.

Weaver, J., Priddy, M., McDowell, D., & Kalidindi, S. (2016). On capturing the grain-scale elastic and plastic anisotropy of alpha-Ti with spherical nanoindentation and electron back-scattered diffraction. Acta Materialia, 117, 23–34.

Weaver, J., Khosravani, A., Castillo, A., Kalidindi, S., & others (2016). Tensile and Microindentation Stress-Strain Curves of Al-6061. Journal is required!.

Kalidindi, S., Medford, A., & Mcdowell, D. (2016). Vision for data and informatics in the future materials innovation ecosystem. JOM, 68(8), 2126–2137.

Kalidindi, S., Brough, D., Li, S., Cecen, A., Blekh, A., Congo, F., & Campbell, C. (2016). Role of materials data science and informatics in accelerated materials innovation. Mrs Bulletin, 41(8), 596–602.

Format techreport not supported yet!

Kalidindi, S., & Desu, S. (1991). A Unified Approach for Modeling CVD Processes. Journal of the Electrochemical Society, 138, 962–969.

Kalidindi, S., & Desu, S. (1990). Analytical Model for the Low Pressure Chemical Vapor Deposition of SiO2 from Tetraethoxysilane. Journal of the Electrochemical Society, 137, 624–628.

Kalidindi, S., & Desu, S. (1990). Determination of Rate Controlling Step in CVD Processes with Gas Phase and Surface Reactions. Japanese Journal of Applied Physics, 29, 1310–1315.

Kalidindi, S., & Perera, W. (1990). MSR Acoustic Vibrations due to the HP and LP Tube Bundle and Cavity Interactions Using Bond Graph Model. Journal of Applied Acoustics, 30, 303–320.

Raju, S., Moses, F., & Schilling (1990). , “Reliability Calibration of Fatigue Evaluation and Design Procedures. ASCE Journal of Structural Engineering, 116, 1356–1369.

Kalidindi, S., Brough, D., Li, S., Cecen, A., Blekh, A., Congo, F., & Campbell, C. (2016). Role of e-Collaborations in Scaling-Up Materials Innovation. Journal is required!.

Format techreport not supported yet!

Format techreport not supported yet!

Weaver, J., & Kalidindi, S. (2016). Mechanical characterization of Ti-6Al-4V titanium alloy at multiple length scales using spherical indentation stress-strain measurements. Materials & Design, 111, 463–472.

Fast, T., Kumbur, E., Kalidindi, S., & others (2014). A data-driven approach to establishing microstructure-property relationships in porous transport layers of polymer electrolyte fuel cells. Journal of Power Sources, 245, 144–153.

Paulson, N., Priddy, M., McDowell, D., & Kalidindi, S. (2017). Reduced-order structure-property linkages for polycrystalline microstructures based on 2-point statistics. Acta Materialia, 129, 428–438.

Turner, D., Niezgoda, S., & Kalidindi, S. (2016). Efficient computation of the angularly resolved chord length distributions and lineal path functions in large microstructure datasets. Modelling and Simulation in Materials Science and Engineering, 24(7), 075002.

Wargo, E., Schulz, V., Cecen, A., Kalidindi, S., & Kumbur, E. (Year is required!). Abstract\# 1634, Honolulu PRiME 2012,\copyright 2012 The Electrochemical Society. Journal is required!.

Gong, X., Mohan, S., Mendoza, M., Gray, A., Collins, P., & Kalidindi, S. (2017). High throughput assays for additively manufactured Ti-Ni alloys based on compositional gradients and spherical indentation. Integrating Materials and Manufacturing Innovation, 6(3), 218–228.

Kalidindi, S., & Desu, S. (1989). Bond Graphs For Cvd Processes. MRS Online Proceedings Library (OPL), 168.

Yabansu, Y., Steinmetz, P., Hötzer, J., Kalidindi, S., & Nestler, B. (2017). Extraction of reduced-order process-structure linkages from phase-field simulations. Acta Materialia, 124, 182–194.

Liu, R., Yabansu, Y., Yang, Z., Choudhary, A., Kalidindi, S., & Agrawal, A. (2017). Context aware machine learning approaches for modeling elastic localization in three-dimensional composite microstructures. Integrating Materials and Manufacturing Innovation, 6(2), 160–171.

Weaver, J., Kalidindi, S., & Wegst, U. (2017). Structure-processing correlations and mechanical properties in freeze-cast Ti-6Al-4V with highly aligned porosity and a lightweight Ti-6Al-4V-PMMA composite with excellent energy absorption capability. Acta Materialia, 132, 182–192.

Sun, Y., Cecen, A., Gibbs, J., Kalidindi, S., & Voorhees, P. (2017). Analytics on large microstructure datasets using two-point spatial correlations: Coarsening of dendritic structures. Acta Materialia, 132, 374–388.

Oca Zapiain, D., Popova, E., & Kalidindi, S. (2017). Prediction of microscale plastic strain rate fields in two-phase composites subjected to an arbitrary macroscale strain rate using the materials knowledge system framework. Acta Materialia, 141, 230–240.

Popova, E., Rodgers, T., Gong, X., Cecen, A., Madison, J., & Kalidindi, S. (2017). Process-structure linkages using a data science approach: application to simulated additive manufacturing data. Integrating materials and manufacturing innovation, 6(1), 54–68.

Sun, Y., Voorhees, P., Shahani, A., Cecen, A., Gibbs, J., Kalidindi, S., & Xiao, X. (2017). Solidification in 4D: from Dendrites to Eutectics. Microscopy and Microanalysis, 23(S1), 320–321.

Altschuh, P., Yabansu, Y., Hötzer, J., Selzer, M., Nestler, B., & Kalidindi, S. (2017). Data science approaches for microstructure quantification and feature identification in porous membranes. Journal of Membrane Science, 540, 88–97.

Knezevic, M., & Kalidindi, S. (2017). Crystal Plasticity Modeling of Microstructure Evolution and Mechanical Fields During Processing of Metals Using Spectral Databases.. JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 69(5).

Priddy, M., Paulson, N., Kalidindi, S., & McDowell, D. (2017). Strategies for rapid parametric assessment of microstructure-sensitive fatigue for HCP polycrystals. International Journal of Fatigue, 104, 231–242.

Kalidindi, S. (1990). MOCVD OF OXIDES: MODELING BY BOND GRAPH TECHNIQUES. In CVD-XI: Proceedings of the Eleventh International Conference on Chemical Vapor Deposition, 1990 (pp. 24).

Brough, D., Wheeler, D., & Kalidindi, S. (2017). Materials knowledge systems in python—a data science framework for accelerated development of hierarchical materials. Integrating materials and manufacturing innovation, 6(1), 36.

Kalidindi, S., Mohan, S., & Rossi, A. (2017). Mechanical characterization of mesoscale interfaces using indentation techniques. JOM, 69(1), 22–29.

Desu, S., & Kalidindi, S. (1988). Contributions of gas phase reactions to CVD processes. MRS Online Proceedings Library (OPL), 131.

Ivosevic, M., Knight, R., Kalidindi, S., Palmese, G., & Sutter, J. (Year is required!). Coatings for Polymer Matrix Composites. Journal is required!.

Latypov, M., & Kalidindi, S. (2017). Data-driven reduced order models for effective yield strength and partitioning of strain in multiphase materials. Journal of Computational Physics, 346, 242–261.

Patel, D., & Kalidindi, S. (2017). Estimating the slip resistance from spherical nanoindentation and orientation measurements in polycrystalline samples of cubic metals. International Journal of Plasticity, 92, 19–30.

Khosravani, A., Cecen, A., & Kalidindi, S. (2017). Development of high throughput assays for establishing process-structure-property linkages in multiphase polycrystalline metals: Application to dual-phase steels. Acta Materialia, 123, 55–69.

Brough, D., Kannan, A., Haaland, B., Bucknall, D., & Kalidindi, S. (2017). Extraction of process-structure evolution linkages from X-ray scattering measurements using dimensionality reduction and time series analysis. Integrating materials and manufacturing innovation, 6(2), 147–159.

Yabansu, Y., & Kalidindi, S. (2016). ‘George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology. In Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering (ICME) (pp. 221).

Gomberg, J., Medford, A., & Kalidindi, S. (2017). Extracting knowledge from molecular mechanics simulations of grain boundaries using machine learning. Acta Materialia, 133, 100–108.

Pathak, S., Kalidindi, S., Weaver, J., Wang, Y., Doerner, R., & Mara, N. (2017). Probing nanoscale damage gradients in ion-irradiated metals using spherical nanoindentation. Scientific reports, 7(1), 1–12.

Pathak, S., Weaver, J., Sun, C., Wang, Y., Kalidindi, S., & Mara, N. (2019). Spherical nanoindentation stress-strain analysis of ion-irradiated tungsten. In Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems–Water Reactors (pp. 617–635).

Iskakov, A., Yabansu, Y., Rajagopalan, S., Kapustina, A., & Kalidindi, S. (2018). Application of spherical indentation and the materials knowledge system framework to establishing microstructure-yield strength linkages from carbon steel scoops excised from high-temperature exposed components. Acta Materialia, 144, 758–767.

Liu, R., Chen, Z., Fast, T., Kalidindi, S., Agrawal, A., & Choudhary, A. (2014). Predictive Modeling in Characterizing Localization Relationships. In TMS Annual Meeting & Exhibition, Symposium of Data Analytics for Materials Science and Manufacturing.

Weaver, J., Sun, C., Wang, Y., Kalidindi, S., Doerner, R., Mara, N., & Pathak, S. (2018). Quantifying the mechanical effects of He, W and He+ W ion irradiation on tungsten with spherical nanoindentation. Journal of materials science, 53(7), 5296–5316.

Cecen, A., Dai, H., Yabansu, Y., Kalidindi, S., & Song, L. (2018). Material structure-property linkages using three-dimensional convolutional neural networks. Acta Materialia, 146, 76–84.

Format techreport not supported yet!

Ramakrishna, S., Zhang, T.Y., Lu, W.C., Qian, Q., Low, J., Yune, J., Tan, D., Bressan, S., Sanvito, S., & Kalidindi, S. (2019). Materials informatics. Journal of Intelligent Manufacturing, 30(6), 2307–2326.

Klimanek, P., Romanov, A., & Seefeldt, M.. (2002). Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystalline Materials: Proceedings of the International Workshop on Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystalline Materials, Held at Rauschenbach/Erzgebirge, April 10-14, 2000.

Kalidindi, S.. (2001). Special issue on: Plasticity and microstructure evolution.

Gupta, A., Bettaieb, M., Abed-Meraim, F., & Kalidindi, S. (2018). Computationally efficient predictions of crystal plasticity based forming limit diagrams using a spectral database. International Journal of Plasticity, 103, 168–187.

Fernandez-Zelaia, P., Joseph, V., Kalidindi, S., & Melkote, S. (2018). Estimating mechanical properties from spherical indentation using Bayesian approaches. Materials & Design, 147, 92–105.

Khosravani, A., Morsdorf, L., Tasan, C., & Kalidindi, S. (2018). Multiresolution mechanical characterization of hierarchical materials: Spherical nanoindentation on martensitic Fe-Ni-C steels. Acta Materialia, 153, 257–269.

Paulson, N., Priddy, M., McDowell, D., & Kalidindi, S. (2018). Data-driven reduced-order models for rank-ordering the high cycle fatigue performance of polycrystalline microstructures. Materials & Design, 154, 170–183.

Spear, A., Kalidindi, S., Meredig, B., Kontsos, A., & Le Graverend, J.B. (2018). Data-driven materials investigations: the next frontier in understanding and predicting fatigue behavior. JOM, 70(7), 1143–1146.

Yang, Z., Yabansu, Y., Al-Bahrani, R., Liao, W.k., Choudhary, A., Kalidindi, S., & Agrawal, A. (2018). Deep learning approaches for mining structure-property linkages in high contrast composites from simulation datasets. Computational Materials Science, 151, 278–287.

Oca Zapiain, D., Popova, E., Abdeljawad, F., Foulk, J., Kalidindi, S., & Lim, H. (2018). Reduced-order microstructure-sensitive models for damage initiation in two-phase composites. Integrating Materials and Manufacturing Innovation, 7(3), 97–115.

Bärring, O., Guerri, M., Bonfillou, E., & others (Year is required!). This content has been downloaded from IOPscience. Please scroll down to see the full text.. Journal is required!.

Knezevic, M., Kalidindi, S., & Fullwood, D. (2007). Computationally efficient database and spectral interpolation for crystal plasticity calculations: Application to facecentered cubic polycrystals. submitted for review.

Cecen, A., Yabansu, Y., & Kalidindi, S. (2018). A new framework for rotationally invariant two-point spatial correlations in microstructure datasets. Acta Materialia, 158, 53–64.

Latypov, M., Kühbach, M., Beyerlein, I., Stinville, J.C., Toth, L., Pollock, T., & Kalidindi, S. (2018). Application of chord length distributions and principal component analysis for quantification and representation of diverse polycrystalline microstructures. Materials Characterization, 145, 671–685.

Paulson, N., Priddy, M., McDowell, D., & Kalidindi, S. (2019). Reduced-order microstructure-sensitive protocols to rank-order the transition fatigue resistance of polycrystalline microstructures. International Journal of Fatigue, 119, 1–10.

Barry, M., Yan, Z., Yoon, M., Kalidindi, S., & Kumar, S. (2018). Phonon transport properties of two-dimensional electride Ca2N—A first-principles study. Applied Physics Letters, 113(13), 131902.

Yao, Z., & Gao, L. (2009). A Chain Approach of Boundary Elemant Row-Subdomains for Simulating the Failure Processes in Heterogeneous Brittle Materials. Computers, Materials & Continua (CMC), 9(1), 1.

Oca Zapiain, D., Abdeljawad, F., Lim, H., Popova, E., & Kalidindi, S. (2017). 2-Phase composite damage initiation sensitivity dataset. Journal is required!.

Latypov, M., Toth, L., & Kalidindi, S. (2019). Materials knowledge system for nonlinear composites. Computer Methods in Applied Mechanics and Engineering, 346, 180–196.

Yang, Z., Yabansu, Y., Jha, D., Liao, W.k., Choudhary, A., Kalidindi, S., & Agrawal, A. (2019). Establishing structure-property localization linkages for elastic deformation of three-dimensional high contrast composites using deep learning approaches. Acta Materialia, 166, 335–345.

Kim, H., Mandal, S., Basu, B., & Kalidindi, S. (2019). Probing Local Mechanical Properties in Polymer-Ceramic Hybrid Acetabular Sockets Using Spherical Indentation Stress-Strain Protocols. Integrating Materials and Manufacturing Innovation, 8(3), 257–272.

Adams, B., Lyons, M., Houskamp, J., & Kalidindi, S. (2003). Microstructure sensitive design of an orthotropic plate subjected to tensile load. Journal is required!.

Kalidindi, S., Bronkhorst, C., & Anand, L. (1990). Crystallographic texture evolution in bulk deformation processing of metal. In Winter Annual Meeting of the American Society of Mechanical Engineers, Nov 25-30 1990.

Murugaiah, A., Barsoum, M., Kalidindi, S., & Zhen, T. (2004). Erratum: Spherical nanoindentations and kink bands in Ti 3 SiC 2. Journal of Materials Research, 19(7), 2194–2203.

Chatterjee, S., Sarkar, S., Kalidindi, S., & Basu, B. (2019). Periprosthetic biomechanical response towards dental implants, with functional gradation, for single/multiple dental loss. Journal of the mechanical behavior of biomedical materials, 94, 249–258.

Fernandez-Zelaia, P., Yabansu, Y., & Kalidindi, S. (2019). A comparative study of the efficacy of local/global and parametric/nonparametric machine learning methods for establishing structure–property linkages in high-contrast 3D elastic composites. Integrating Materials and Manufacturing Innovation, 8(2), 67–81.

Bock, F., Aydin, R., Cyron, C., Huber, N., Kalidindi, S., & Klusemann, B. (2019). A review of the application of machine learning and data mining approaches in continuum materials mechanics. Frontiers in Materials, 6, 110.

Castillo, A., & Kalidindi, S. (2019). A Bayesian framework for the estimation of the single crystal elastic parameters from spherical indentation stress-strain measurements. Frontiers in Materials, 6, 136.

Kalidindi, S. (2019). A Bayesian framework for materials knowledge systems. MRS Communications, 9(2), 518–531.

Format techreport not supported yet!

Castillo, A., Joseph, V., & Kalidindi, S. (2019). Bayesian sequential design of experiments for extraction of single-crystal material properties from spherical indentation measurements on polycrystalline samples. JOM, 71(8), 2671–2679.

Tallman, A., Stopka, K., Swiler, L., Wang, Y., Kalidindi, S., & McDowell, D. (2019). Gaussian-process-driven adaptive sampling for reduced-order modeling of texture effects in polycrystalline alpha-Ti. JOM, 71(8), 2646–2656.

Priddy, M., Paulson, N., McDowell, D., & Kalidindi, S. (2017). Synthetic alpha-Ti Microstructures and Associated Transition Fatigue Responses. Journal is required!.

\kIe\kien, A., Fast, T., Kumbur, E., & Kalidindi, S. (2014). A data-driven approach to establishing microstructureeproperty relationships in porous transport layers of polymer electrolyte fuel cells. J. Power Sources, 245(144), e153.

Yabansu, Y., Iskakov, A., Kapustina, A., Rajagopalan, S., & Kalidindi, S. (2019). Application of Gaussian process regression models for capturing the evolution of microstructure statistics in aging of nickel-based superalloys. Acta Materialia, 178, 45–58.

Oca Zapiain, D., & Kalidindi, S. (2019). Localization models for the plastic response of polycrystalline materials using the material knowledge systems framework. Modelling and Simulation in Materials Science and Engineering, 27(7), 074008.

Van Houtte, P., Kalidindi, S., & Saerens, A. (2006). Measurement and modelling of residual stresses and texture in aluminium interconnects in micro-electronic devices. In ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES (pp. S8–S8).

Yabansu, Y., Rehn, V., Hötzer, J., Nestler, B., & Kalidindi, S. (2019). Application of Gaussian process autoregressive models for capturing the time evolution of microstructure statistics from phase-field simulations for sintering of polycrystalline ceramics. Modelling and Simulation in Materials Science and Engineering, 27(8), 084006.

Kalidindi, S., Khosravani, A., Yucel, B., Shanker, A., & Blekh, A. (2019). Data infrastructure elements in support of accelerated materials innovation: ELA, PyMKS, and MATIN. Integrating Materials and Manufacturing Innovation, 8(4), 441–454.

Weaver, J., & Kalidindi, S. (2017). Spherical Indentation Stress-Strain Analysis. Journal is required!.

Priddy, M., Kalidindi, S., McDowell, D., & Paulson, N. (2017). Synthetic alpha-Ti Microstructures and Associated Elastic Stiffness and Yield Strength Properties-Extended. Journal is required!.

Khosravani, A., Cecen, A., & Kalidindi, S. (2016). High Throughput Assays for Process-Structure-Property Linkages in Dual-Phase Steels. Journal is required!.

Priddy, M., Kalidindi, S., McDowell, D., & Paulson, N. (2017). Synthetic alpha-Ti Microstructures and Associated High Cycle Fatigue Responses via Crystal Plasticity Finite Element Method Simulations. Journal is required!.

Priddy, M., Paulson, N., Kalidindi, S., & McDowell, D. (2017). Synthetic alpha-Ti Microstructures and Associated High Cycle Fatigue Responses via Novel Protocols. Journal is required!.

Weaver, J., Khosravani, A., Castillo, A., & Kalidindi, S. (Year is required!). High Throughput Exploration of Process-Property Linkages in Al-6061 using Instrumented. J Mater Res, 8(2), 297–306.

Turner, D., & Kalidindi, S. (2017). Microstructure Maker-3D Microstructure Reconstruction from 2D data/images. Journal is required!.

Yang, Z., Al-Bahrani, R., Reid, A., Papanikolaou, S., Kalidindi, S., Liao, W.k., Choudhary, A., & Agrawal, A. (2019). Deep learning based domain knowledge integration for small datasets: Illustrative applications in materials informatics. In 2019 International Joint Conference on Neural Networks (IJCNN) (pp. 1–8).

Bhattachayya, A., El-Danaf, E., Kalidindi, S., & Doherty, R. (2001). Evolution of grain-scale microstructure during large strain simple compression of polyrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations. Int. J. Plast, 17, 861.

Rossi, A., Castillo, A., Przybyla, C., & Kalidindi, S. (2019). Study of Local Mechanical Responses in an Epoxy–Carbon Fiber Laminate Composite Using Spherical Indentation Stress–Strain Protocols. Integrating Materials and Manufacturing Innovation, 8(4), 495–508.

Wheeler, D., Brough, D., Fast, T., Kalidindi, S., & Reid, A. (2014). PYMKS: materials knowledge system in Python. Figshare, 10, m9.

Weaver, J., Li, N., Mara, N., Jones, D., Cho, H., Bronkhorst, C., Fensin, S., & Gray III, G. (Year is required!). Intended for: Acta Materialia. Journal is required!.

Khosravani, A., Caliendo, C., & Kalidindi, S. (2020). New insights into the microstructural changes during the processing of dual-phase steels from multiresolution spherical indentation stress–strain protocols. Metals, 10(1), 18.

Iskakov, A., & Kalidindi, S. (2020). A framework for the systematic design of segmentation workflows. Integrating Materials and Manufacturing Innovation, 9(1), 70–88.

Blekh, A., & Kalidindi, S. (2019). MATIN Platform Video Tutorial Series. Journal is required!.

Warren, J., Wheeler, D., Brough, D., & Kalidindi, S. (2017). Microstructure Knowledge Systems for Capturing Process-Structure Evolution Linkages. Journal is required!.

Huber, N., Kalidindi, S., Klusemann, B., & Cyron, C. (2020). Machine Learning and Data Mining in Materials Science. Frontiers in Materials, 7, 51.

Format incollection not supported yet!

Yabansu, Y., & Kalidindi, S. (2019). Microscale volume elements and their effective/homogenized stiffness parameter for high contrast 3-D elastic composite. Journal is required!.

Castillo, A., & Kalidindi, S. (2021). Bayesian estimation of single ply anisotropic elastic constants from spherical indentations on multi-laminate polymer-matrix fiber-reinforced composite samples. Meccanica, 56(6), 1575–1586.

Yabansu, Y., Altschuh, P., Hötzer, J., Selzer, M., Nestler, B., & Kalidindi, S. (2020). A digital workflow for learning the reduced-order structure-property linkages for permeability of porous membranes. Acta Materialia, 195, 668–680.

Kalidindi, S., Gupta, A., & Popova, E. (2020). Computationally efficient crystal plasticity simulations using spectral databases. Handbook of Materials Modeling: Methods: Theory and Modeling, 1685–1710.

Parvinian, S., Yabansu, Y., Khosravani, A., Garmestani, H., & Kalidindi, S. (2020). High-Throughput Exploration of the Process Space in 18\% Ni (350) Maraging Steels via Spherical Indentation Stress–Strain Protocols and Gaussian Process Models. Integrating Materials and Manufacturing Innovation, 9(3), 199–212.

Kalidindi, S. (2020). Feature engineering of material structure for AI-based materials knowledge systems. Journal of Applied Physics, 128(4), 041103.

Millan Espitia, N., Mohan, S., Pilchak, A., & Kalidindi, S. (2020). Spherical nanoindentation stress-strain curves of primary-$\alpha$ grains in Ti5-2.5, Ti811, Ti64, Ti6242 and Ti6246 alloys. Journal is required!.

Yucel, B., Yucel, S., Ray, A., Duprez, L., & Kalidindi, S. (2020). Mining the correlations between optical micrographs and mechanical properties of cold-rolled HSLA steels using machine learning approaches. Integrating Materials and Manufacturing Innovation, 9(3), 240–256.

Barry, M., Wise, K., Kalidindi, S., & Kumar, S. (2020). Voxelized Atomic Structure Potentials: Predicting Atomic Forces with the Accuracy of Quantum Mechanics Using Convolutional Neural Networks. The Journal of Physical Chemistry Letters, 11(21), 9093–9099.

Venkatraman, A., Oca Zapiain, D., Lim, H., & Kalidindi, S. (2021). Texture-sensitive prediction of micro-spring performance using Gaussian process models calibrated to finite element simulations. Materials & Design, 197, 109198.

Millan-Espitia, N., Mohan, S., Pilchak, A., & Kalidindi, S. (2021). Mechanical Responses of Primary-$\alpha$ Ti Grains in Polycrystalline Samples: Part I—Measurements of Spherical Indentation Stress–Strain Curves. Integrating Materials and Manufacturing Innovation, 10(1), 82–98.

Castillo, A., Venkatraman, A., & Kalidindi, S. (2021). Mechanical Responses of Primary-$\alpha$ Ti Grains in Polycrystalline Samples: Part II—Bayesian Estimation of Crystal-Level Elastic-Plastic Mechanical Properties from Spherical Indentation Measurements. Integrating Materials and Manufacturing Innovation, 10(1), 99–114.

Venkatraman, A., Oca Zapiain, D., & Kalidindi, S. (2020). Reduced-Order Models for Ranking Damage Initiation in Dual-Phase Composites Using Bayesian Neural Networks. JOM, 72(12), 4359–4369.

Gong, X., Yabansu, Y., Collins, P., & Kalidindi, S. (2020). Evaluation of Ti–Mn Alloys for Additive Manufacturing Using High-Throughput Experimental Assays and Gaussian Process Regression. Materials, 13(20), 4641.

Abba, M., & Kalidindi, S. (2020). Protocols for studying the time-dependent mechanical response of viscoelastic materials using spherical indentation stress-strain curves. Mechanics of Time-Dependent Materials, 1–20.

Hashemi, S., & Kalidindi, S. (2021). A machine learning framework for the temporal evolution of microstructure during static recrystallization of polycrystalline materials simulated by cellular automaton. Computational Materials Science, 188, 110132.

Leclerc, N., Khosravani, A., Hashemi, S., Miracle, D., & Kalidindi, S. (2021). Correlation of Measured Load-Displacement Curves in Small Punch Tests with Tensile Stress-Strain Curves. Acta Materialia, 204, 116501.

Muth, A., John, R., Pilchak, A., Kalidindi, S., & McDowell, D. (2021). Analysis of fatigue indicator parameters for ti-6al-4v microstructures using extreme value statistics in the hcf regime. International Journal of Fatigue, 145, 106096.

Mahdavi, M., Standish, M., Iskakov, A., Garmestani, H., & Kalidindi, S. (2021). Reduced-Order Models Correlating Ti Beta 21S Microstructures and Vickers Hardness Measurements. Materials Genome Engineering, 1–11.

Robertson, A., & Kalidindi, S. (2021). Digital representation and quantification of discrete dislocation networks. arXiv preprint arXiv:2101.03925.

Yucel, S., Moon, R., Johnston, L., Yucel, B., & Kalidindi, S. (2021). Semi-automatic image analysis of particle morphology of cellulose nanocrystals. Cellulose, 28(4), 2183–2201.

Mohan, S., Millan-Espitia, N., Yao, M., Steenberge, N., & Kalidindi, S. (2021). Critical Evaluation of Spherical Indentation Stress-Strain Protocols for the Estimation of the Yield Strengths of Steels. Experimental Mechanics, 61(4), 641–652.

Courtright, Z., Leclerc, N., Kim, H., & Kalidindi, S. (2021). Critical Comparison of Spherical Microindentation, Small Punch Test, and Uniaxial Tensile Testing for Selective Laser Melted Inconel 718. Applied Sciences, 11(3), 1061.

Gupta, A., & Kalidindi, S. (2021). Addressing biases in spectral databases for increasing accuracy and computational efficiency of crystal plasticity computations. International Journal of Plasticity, 138, 102945.

Kelly, C., & Kalidindi, S. (2021). Recurrent localization networks applied to the Lippmann-Schwinger equation. Computational Materials Science, 192, 110356.

Parvinian, S., Sievers, D., Garmestani, H., & Kalidindi, S. (2021). Evaluation of the influence of B and Nb microalloying on the microstructure and strength of 18\% Ni maraging steels (C350) using hardness, spherical indentation and tensile tests. Acta Materialia, 117071.

Ravikumar, K., Voigt, S., Kalidindi, S., & Basu, B. (2021). Critical comparison of image analysis workflows for quantitative cell morphological evaluation in assessing cell response to biomaterials. Biomedical Materials, 16(3), 034101.

Voigt, S., & Kalidindi, S. (2021). Materials graph ontology. Materials Letters, 295, 129836.

Zhu, S., Voigt, S., Yuchi, H., Key, J., Xie, Y., Kacher, J., & Kalidindi, S. (2021). Harvesting data revolution for transmission electron microscopy (TEM) using signal processing. arXiv preprint arXiv:2104.08688.

Robertson, A., & Kalidindi, S. (2021). Digital Representation and Quantification of Discrete Dislocation Structures. JOM, 1–16.

Abba, M., Dauda, M., & Kalidindi, S. (2021). DISCRETE DECONVOLUTION TO EXTRACT VISCOELASTIC MATERIAL PROPERTIES FROM SPHERICAL NANOINDENTATION. Nigerian Journal of Engineering, 28(1), 32–38.

Oca Zapiain, D., Shanker, A., & Kalidindi, S. (2021). Convolutional Neural Networks for the Localization of Plastic Velocity Gradient Tensor in Polycrystalline Microstructures. Journal of Engineering Materials and Technology, 144(1), 011004.

Voigt, S., Ravikumar, K., Basu, B., & Kalidindi, S. (2021). Automated Image Processing Workflow for Morphological Analysis of Fluorescence Microscopy Cell Images. JOM, 1–10.

Marshall, A., & Kalidindi, S. (2021). Autonomous Development of a Machine-Learning Model for the Plastic Response of Two-Phase Composites from Micromechanical Finite Element Models. JOM, 1–11.

Kunka, C., Shanker, A., Chen, E., Kalidindi, S., & Dingreville, R. (2021). Decoding defect statistics from diffractograms via machine learning. npj Computational Materials, 7(1), 1–9.

Kemp, J., Diaz, A., Malek, E., Croom, B., Apostolov, Z., Kalidindi, S., Compton, B., & Rueschhoff, L. (2021). Direct ink writing of ZrB2-SiC chopped fiber ceramic composites. Additive Manufacturing, 44, 102049.

Kaundinya, P., Choudhary, K., & Kalidindi, S. (2021). Machine learning approaches for feature engineering of the crystal structure: Application to the prediction of the formation energy of cubic compounds. Physical Review Materials, 5(6), 063802.

Hossain, M., Borman, T., Kumar, A., Chen, X., Khosravani, A., Kalidindi, S., Paisley, E., Esters, M., Oses, C., Toher, C., & others (2021). Carbon Stoichiometry and Mechanical Properties of High Entropy Carbides. Acta Materialia, 117051.

Brodkin, D., Zavaliangos, A., Kalidindi, S., & Barsoum, M. (1996). MICROSTRUCTURAL OPTIMIZATION AND MECHANICAL PROPERTIES OF TITANIUM CARBIDE-TITANIUM BORDE COMPOSITES FABRICATED BY. Processing and Fabrication of Advanced Materials IV, 4, 189.

Barsoum, M., Zhen, T., Zhou, A., Basu, S., & Kalidindi, S. (2005). Structure, structural phase transitions, mechanical properties, defects-Microscale modeling of kinking nonlinear elastic solids. Physical Review-Section B-Condensed Matter, 71(13), 134101–134101.

Abhishek Bhattacharyya, E.D., & Kalidindi, S. (2000). and Roger D. Doherty. In Advances in Engineering Plasticity: Proceedings of the.. Asia-Pacific Symposium on Advances in Engineering Plasticity and Its Applications (AEPA). (pp. 183).

Desu, S., & Kalidindi, S. (1989). Department of Materials Engineering, Virginia Polytechnic Institute, Blacksburg, VA 24061;** Department of Mechanical Engineering, MIT, Cambridge MA 02139.. Chemical Perspectives of Microelectronic Materials: Volume 131, 131, 307.